Check HDCP warnings

You may see an HDCP warning if:

• TV firmware is out of date
• Incompatible TV or other equipment
• a faulty HDMI cable

If you're seeing this error, you can change the HDCP notifications by completing the below: 

On an iQ3/4/5:

1. Press the Home button on the Foxtel remote
2. Scroll to Settings (the Cog Wheel)
3. Go to Notifications, then to HDCP Warning Settings 
4. Select No Warnings and press Back to save changes. 

On an iQ2:

1. Press Active on the Foxtel remote 
2. Go to Set Up and then Advanced Settings
3. Go to Picture Settings, then select High Definition Settings 
4. Navigate to the HDCP Warning Settings and then use the arrows to change to No Warning. 
5. Save settings